How to Recharge PM4 Battery? (Easy Technique)

Published on: October 15, 2022
Written by Jonas Frank / Fact-checked by Nova Scarlett

Batteries are a vital part of our lives; they power our phones, laptops, and many other devices. So, how to recharge the PM4 battery?

First, make sure that your PM4 is turned off. Next, connect the charging cable to the PM4 and plug it into a power outlet. Once the charging indicator on the PM4 turns on, leave the device to charge for at least 3 hours.

how to recharge pm4 battery

After 3 hours have passed, unplug the charger and turn on your PM4. You should now have a fully charged battery!

  • Locate the PM4 battery charger port;
  • This is typically located on the side or bottom of the PM4 unit;
  • Plug the charger cord into the PM4 battery charger port;
  • Insert the other end of the charger cord into a wall outlet or other power source;
  • The charging process will begin automatically and an indicator light will usually illuminate to indicate that the unit is charging correctly;
  • Once the PM4 battery is fully charged, unplug the charger cord from both the PM4 unit and power source, then disconnect any other cables or accessories that may be attached to the unit;

Where is Battery on the Concept 2 Rower?

The battery on a Concept 2 rower is located in the seat. There is a small compartment under the seat where the battery is stored. To access the battery, simply remove the seat and lift up the cover of the compartment.

Does Concept 2 Rower Need to Be Plugged In?

No, the Concept 2 rower does not need to be plugged in. It is a self-contained unit that uses a flywheel to generate resistance. The flywheel is powered by the user’s rowing motion, so there is no need for an external power source.

does concept 2 rower need to be plugged in

Concept 2 PM4 Battery Charger

If you’ve got a Concept2 indoor rower, chances are you’re using the PM4 monitor. The PM4 is a great piece of equipment that provides detailed information about your workout, but it can be a bit tricky to understand all the different screens and settings. That’s why we’ve put together this comprehensive guide to the Pm4 battery charger.

The first thing you need to know is that the PM4 uses two AA batteries. These can be found in most stores that sell batteries, and they should be replaced every few months to ensure optimal performance. When it comes time to charge a lead acid battery or your batteries, there are two options:

Option 1

The first option is to use the standard AA battery charger that comes with your PM4. This charger will take about 8 hours to fully charge your batteries.

Option 2

The second option is to purchase a separate AA battery charger specifically for the PM4.

These chargers are faster and will typically only take 4-5 hours to charge your batteries. We recommend this option if you’re looking for the quickest way to get back on the rower! Once your batteries are charged, simply insert them into your PM4 and you’re ready to go! You can see the principle of battery charger.

Concept 2 Battery PM4

If you’re in the market for a new battery pack, the Concept 2 Battery PM4 is definitely worth checking out. This powerful little battery packs a punch and can power most electric scooters and bicycles for up to 20 miles on a single charge. The PM4 is made by the same company that makes the popular line of Concept 2 rowing machines, so you know it’s a quality product.

It’s also backed by a 1-year warranty, which is always nice to have. One of the best things about this battery is that it only weighs 3.5 pounds, making it one of the lightest options on the market. That means it won’t add too much weight to your scooter or bike, and won’t slow you down when you’re riding.

If you’re looking for a reliable and affordable battery pack, the Concept 2 Battery PM4 should definitely be at the top of your list!

How to Charge PM5?

If you’re a fan of the Peloton exercise bike, you’re probably familiar with the PM5 monitor that comes with it. The PM5 is a powerful piece of equipment that allows you to track your workout data and progress over time. But if you’re new to the Peloton, you might be wondering how to charge the PM5 monitor.

Here’s a step-by-step guide on how to charge your Peloton PM5:

Step 1Connect the power cord to the charging port on the back of the PM5.
Step 2Plug the other end of the power cord into an outlet.
Step 3Once plugged in, the LED light on the front of the PM5 will turn red, indicating that it’s charging.
Step 4It typically takes about 4 hours for a full charge, so we recommend charging overnight or while you’re not using your bike. That’s all there is to it!

Now you know how to keep your Peloton PM5 powered up and ready to go for your next workout session.

PM5 Battery

If you’re a cyclist, then you know all about the importance of having a good battery for your bike. The PM5 Battery is one of the best on the market, and it’s perfect for those who want to get the most out of their cycling experience. Here’s everything you need to know about this top-of-the-line battery.

The PM5 Battery is a high-performance lithium-ion battery that’s specifically designed for use with bikes. It has a capacity of 5,000mAh, which means it can provide plenty of power for even the longest rides. It also features an integrated USB port, so you can easily charge your devices while on the go.

This battery is also incredibly lightweight, making it perfect for cyclists who are always on the move. And because it’s rechargeable, you’ll never have to worry about running out of power while out on a ride. Whether you’re an experienced cyclist or just getting started, the PM5 Battery is a great option for anyone who wants to get the most out of their biking experience.

With its high capacity and rechargeable design, it’s sure to keep you going mile after mile.

Concept 2 Battery Size

The Concept 2 Battery Size is a versatile, high-capacity battery that can be used in a variety of electronic devices. It is perfect for use in digital cameras, camcorders, laptops, and other portable electronic devices. This battery provides long-lasting power and can be recharged many times over.

The Concept 2 Battery Size is also environmentally friendly and recyclable.

Concept 2 Rower Battery

If you’re like most people, you probably don’t think much about the battery in your Concept 2 Rower. But did you know that there are actually two different types of batteries that can be used in these popular rowing machines? The first is a standard lead-acid battery, which is what most people use.

These batteries are relatively inexpensive and easy to find, but they do have some drawbacks. Lead-acid batteries tend to be heavy and bulky, and they need to be regularly replaced. The second type of battery that can be used in a Concept 2 Rower is a lithium-ion battery.

Lithium-ion batteries are much lighter and more compact than lead-acid batteries, making them ideal for use in rowing machines. They also last longer than lead-acid batteries, so you won’t need to replace them as often. However, lithium-ion batteries are more expensive than their lead-acid counterparts.

So which type of battery should you use in your Concept 2 Rower? Ultimately, the decision comes down to personal preference and budget. If you’re looking for the most economical option, then a lead-acid battery is probably the way to go.

But if you want a lighter-weight machine with fewer replacement costs, then a lithium-ion battery might be the better choice for you.

Concept 2 Battery Replacement

Concept 2 Battery Replacement Most of us never think about the battery in our rowing machine until it needs to be replaced. If you’ve got a Concept2, chances are good that you’ll need to replace the battery at some point.

Here’s what you need to know about replacing the battery in your Concept2. The first thing you need to do is identify the type of battery that you need. The three most common types of batteries used in Concept2 rowers are AA, AAA, and 9-volt.

You can find this information on the sticker located at the bottom of your machine. Once you know which type of battery you need, purchase the correct replacement from a store or online retailer. Next, locate the screws that hold the cover over the battery compartment.

These are usually located near the bottom of the machine (near where your feet would go when rowing). Use a Phillips head screwdriver to remove these screws and set them aside in a safe place. Carefully lift off the cover and set it aside – be careful not to lose any small parts!

Now it’s time to remove the old battery. Gently pry it out of its compartment using a flathead screwdriver or another similar tool. Take care not to damage any electrical components as you do this.

Once the old battery is out, dispose of it properly according to local regulations (usually this means recycling). Now it’s time to install the new battery. Insert it into its compartment positive side up – again, take care not to damage any sensitive electrical parts as you do this!

Replace any small parts or covers that were removed earlier, then use your screwdriver to secure them in place once more. That’s it – your Concept2 rower should now be good as new!

Concept 2 PM4 Monitor Rechargeable Battery Pack (Model D & E Rowing Machines)

If you have a Concept2 rowing machine with a PM4 monitor, you may be wondering if you can use a rechargeable battery pack instead of AA batteries. The answer is yes! You can purchase a rechargeable battery pack for your PM4 monitor from Concept2.

This battery pack will work with both the Model D and E rowing machines. The Concept2 Rechargeable Battery Pack comes with a charger and two batteries. It is recommended that you charge the batteries before using them for the first time.

Once they are charged, you can use them in your PM4 monitor just like AA batteries. The battery pack will last for approximately 50 hours of use, which is much longer than AA batteries. If you are interested in purchasing a Concept2 Rechargeable Battery Pack, please visit our website or contact us at 1-800-245-5676.


The post covers how to recharge a PM4 battery. It begins by outlining the tools and materials needed: a charger, either AC or DC; batteries; and a power source. Next, it explains how to connect the charger to the power source and batteries.

Finally, it offers troubleshooting tips in case the charging process is not working properly.

Used Resources:

Rate this post

Leave a Comment