How to Charge the YFZ450 Battery & How Many Volts is It?

Published on: October 15, 2022
Written by Jonas Frank / Fact-checked by Nova Scarlett

The YFZ450 battery can be charged in a few different ways. One way is to use the charging cord that comes with the ATV. Another way is to use a standard 12-volt car battery charger.

how to charge the yfz450 battery

Finally, you can also use a trickle charger designed for motorcycles or ATVs.

  • Park the vehicle on a level surface and set the parking brake;
  • Disconnect the negative battery terminal by loosening the nut with a wrench;
  • Connect the positive lead from the charger to the positive battery terminal, then connect the negative lead from the charger to a metal ground on the engine or frame of the vehicle;
  • Plug in the charger and set it to charge a 12V battery at 2 amps;
  • Check the charging progress after an hour by observing the voltmeter on the charger;
  • The voltage should be between 13;
  • 6 and 14;
  • 4 volts when fully charged.

What Kind of Battery Does a YFZ450 Take?

The Yamaha YFZ450 is a four-wheeler that was first introduced in 2004. It has a 450cc four-stroke engine and can reach speeds of up to 60 miles per hour. The YFZ450 takes a 12-volt battery.

How Much is a Stator for a YFZ450?

If you’re in need of a stator for your Yamaha YFZ 450, you can expect to pay around $200 for a quality replacement part. Your stator is responsible for generating electricity to power the ignition and other electrical components on your four-wheeler, so it’s important to keep it in good working order. A failing stator can cause all sorts of problems, from a dead battery to engine misfires.

If you suspect your stator is going bad, it’s best to replace it sooner rather than later.

how much is a stator for a yfz450
Credit: www.partzilla.com

People Also Asked

How Many Volts is a YFZ450 Battery?

A YFZ450 battery typically has around 12 volts. This can vary slightly depending on the make and model of the ATV, but it is generally in this range. The battery is responsible for powering the electrical components of the ATV, such as the headlights, taillights, and engine ignition.

Without a strong and reliable battery, these systems will not work properly or at all.

On the other hand, how many volts does a YFZ450R battery have? The YFZ450R has a 12-volt battery. That’s twice the voltage of a standard car battery, and it’s enough to give the YFZ450R some serious get-up-and-go. In fact, the YFZ450Rcan go from 0 to 60 mph in just 3.5 seconds.

What Battery Does the YFZ450 2005 Take?

The YFZ 450 2005 takes a 12-volt, lead acid battery.

Conclusion

Remove the battery from the quad. Next, locate the charging port on the side of the battery.

Once you’ve found it, insert the charger’s positive lead into the port. Then, connect the negative lead to a good ground source. Finally, plug in your charger and turn it on.

That’s all there is to it!

Rate this post

Leave a Comment